The new 8-channel vibration analyzer A4500 VA5 Pro
- 8 CHANNEL SIGNAL ANALYZER
- 4 AC inputs for vibration measurement
- 4 DC inputs for process values measurement
- Tacho input (speed/trigger)
- Vibration analyzer
- Balancer
- RAW signal recorder
- Thermal imaging camera
- Machine faults autodetection
- Route data collector
- Sound analyzer
- Operating Deflection Shapes
- Ultrasound detector
- Run Up - Coast down
- Lubrication monitoring
- Stethoscope
VA5 Pro Specifications | |
Input channels | • 4 x AC, ICP® power supply on/off |
• 4 x DC for process values | |
• 1 x TACHO for speed probe/external trigger | |
Input range | • AC +/- 12 V peak-peak |
• DC +/- 24V | |
AD conversion | • 24 bit, 64 bit internal signal processing |
• No AutoGain function! | |
Dynamic range S/N | • 120 dB |
Frequency ranges (-3 dB) | • Maximum range: 0.35 Hz - 90 kHz |
(1 Ch, 194 kHz sampling) | |
• Maximum range: 0.35 Hz - 25 kHz | |
(4 Ch, 64 kHz sampling) | |
• Minimum range: 0.35 Hz - 25 Hz | |
(4 Ch, 64 Hz sampling) | |
Sampling mode | • Fully simultaneous for 4 channels |
FFT resolution | • Min. 100 lines |
• Max. 3 276 800 lines | |
Unit modes | • Analyzer - analytical measurements |
• Data collector - route measurements | |
• Balancer - 1 and 2 plane on site balancing | |
• Run up - run up and coast down measurements | |
• Recorder - raw signal recording for later post analysis | |
• Stethoscope - listening of the bearing/machine noise | |
• FASIT - expert system for automatic fault detection | |
• Octave analyzer - hearable sound measurements | |
• Bump test - measurement of natural frequencies | |
• ADS - Animated Deflection Shapes (Operating deflection shapes) | |
• Ultrasound - measurement of ultrasound in 30 - 50 kHz range | |
• Camera | |
• IR Camera | |
• Gallery | |
Display | • 1125 x 800 pixels |
Built-in camera | • 5 MPx, autofocus |
Thermal imaging camera (optionally) | • 384 x 288 pixels |
• -10°C ~ 250°C temp. range | |
• 50 mK NETD sensitivity | |
Processor | • Intel Atom 1.9 GHz |
Memory, Route | • 64 GB, max. 16 GB for one route, number of routes is limited by free memory only |
Data processing | • Real time FFT |
• DEMOD - ENVELOPE analysis | |
• ACMT - low speed bearing analysis | |
• Order analysis | |
• User band pass analysis | |
• RPM measurement | |
• DC measurement | |
• Orbit measurement | |
Raw signal recorder | • 64 kHz sampling frequency |
• 4 Ch memory consumption 3 GB/hour | |
• 4 Ch total recording - 20 hours | |
Trigger | • Manual, External, Signal level, Time |
• Speed change, Time interval | |
Interface | • USB 3.0, 2.0 compatible |
Operating temperature range | • -10˚C to +50˚C |
Power | • Battery 8 hours of operation, AC 230 V |
Case | • Aluminium heavy duty |
Size & Weight | • 29,5 x 23 x 4,9 cm, 2 Kg |