PCB-(M)612A01
basic data | |||
sensitivity (±10%) | 26 pC/g | 2.6 pC/(m/s²) | [1] |
frequency range (+ 10%) | 300,000 cpm | 5,000 Hz | [4] |
Frequency range (+ 3 dB) | 600,000 cpm | 10,000 Hz | |
resonance frequency | 1,800 kcpm | 30,000 Hz | [3] |
linearity error | ≤1% | [2] | |
transverse acceleration sensitivity | ≤5% | ||
conditions | |||
Overload limit ( Shock) | 5,000 g pk | 49,050 m/s² pk | |
temperature range (operation) | 65 … 500 ° F | -54 … 260 ° C | |
protection class | IP68 | ||
technical | |||
capacity | 1,500 pF | [3] | |
insulation resistance (at room temperature) | ≥500 GΩ | [3] | |
electrical insulation (base) | >100 MΩ | [3 ] | |
Output polarity | negative | ||
physical properties | |||
sensor element | ceramic | ||
geometry of the sensor element | Shear principle | ||
housing material | stainless steel | ||
sealing | hermetically sealed welded | ||
Size - hex | 7/8 in | 22.2 mm | |
size - height | 2.12 in | 53.8 mm | |
mass | 2.95 oz | 83.6 g | [3] |
Connection position | above | ||
electrical connection | 2-pin connector (MIL-C-5015) | ||
mounting thread | 1/4 "-28 UNF | No metric equivalent | |
Assembly torque | 2 … 5 ft-lb | 2.7 … 6.8 Nm | |
notes | |||
[1] | conversion factor 1 g = 9.81 m/s² | ||
[2] | zero-based balancing line, determined using the method of least squares | ||
[]3] | typical value | ||
[4] | 1 Hz 60 = cpm ("Cycles Per Minute": revolutions per minute) | ||
equipment | |||
081A40 | mounting bolts with 1/4 "-28 thread | -1 | |
ICS-1 | frequency response for uniaxial sensors from 10 Hz up to the upper 5% frequency | -1 | |
(M)" Metric mounting | |||
equipment | |||
M081A61 | metric mounting bolts with M6 thread | -1 |