PCB-J353B33
High sensitivity, quartz shear ICP® accel., 100 mV/g, 1 to 4k Hz, 10-32 side conn. ground isolated
- Sensitivity: (±5%)100 mV/g (10.19 mV/(m/s²))
- Measurement Range: ±50 g pk (±491 m/s² pk)
- Broadband Resolution: 0.0005 g rms (0.005 m/s² rms)
- Frequency Range: (±5%)1 to 4000 Hz
- Sensing Element: Quartz
- Weight: 0.95 oz (27 gm)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[4] B and Q options supplied with a sensitivity tolerance of ± 10 %.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Sensitivity (±5 %) | 100 mV/g | 10.19 mV/(m/s²) | [4] |
Measurement Range | ±50 g pk | ±491 m/s² pk | |
Frequency Range (±5 %) | 1 to 4000 Hz | 1 to 4000 Hz | |
Frequency Range (±10 %) | 0.7 to 6500 Hz | 0.7 to 6500 Hz | |
Frequency Range (±3 dB) | 0.35 to 12000 Hz | 0.35 to 12000 Hz | |
Resonant Frequency | ≥22 kHz | ≥22 kHz | |
Broadband Resolution (1) | 0.0005 g rms | 0.005 m/s² rms | [2] |
Non-Linearity | ≤1 % | ≤1 % | [1] |
Transverse Sensitivity | ≤5 % | ≤5 % | [3] |
Environmental | |||
Overload Limit (Shock) | ±10000 g pk | ±98100 m/s² pk | |
Temperature Range (Operating) | -65 to +250 °F | -54 to +121 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | [2] |
Base Strain Sensitivity | 0.0002 g/µε | 0.002 (m/s²)/µε | [2] |
Electrical | |||
Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤100 Ohm | ≤100 Ohm | |
Output Bias Voltage | 7.5 to 12.0 VDC | 7.5 to 12.0 VDC | |
Discharge Time Constant | 0.5 to 2.0 sec | 0.5 to 2.0 sec | |
Settling Time (within 10% of bias) | <25 sec | <25 sec | |
Spectral Noise (1 Hz) | 320 µg/√Hz | 3139 (µm/sec2)/√Hz | [2] |
Spectral Noise (10 Hz) | 70 µg/√Hz | 687 (µm/sec2)/√Hz | [2] |
Spectral Noise (100 Hz) | 18 µg/√Hz | 177 (µm/sec2)/√Hz | [2] |
Spectral Noise (1 kHz) | 6.4 µg/√Hz | 63 (µm/sec2)/√Hz | [2] |
Physical | |||
Size - Height | 0.93 in | 23.6 mm | |
Size - Hex | 0.75 in | 19.1 mm | |
Weight | 0.95 oz | 27 gm | [2] |
Sensing Element | Quartz | Quartz | |
Sensing Geometry | Shear | Shear | |
Housing Material | Titanium | Titanium | |
Sealing | Welded Hermetic | Welded Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Electrical Connection Position | Side | Side | |
Mounting Thread | 10-32 Female | 10-32 Female |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
080A12 | Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insolation hardcoat finish | 1 |
081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 1 |
ACS-1 | Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable | 1 |
ACS-4 | Single axis, low frequency phase and amplitude response cal from 0.5 to 10 Hz, (requires ACS-1 and minimum sensitivity of 20 mV/g) | 1 |
M081B05 | Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu | 1 |
Optional Versions
(B) Low bias electronics
English | SI | |
---|---|---|
Output Bias Voltage | 4.5 to 7.5 VDC | |
Excitation Voltage | 12 to 30 VDC | |
Constant Current Excitation | 1 to 20 mA | |
Measurement Range | 30 g pk | 294 m/s² pk |
(J) Ground Isolated
English | SI | |
---|---|---|
Frequency Range | 1 to 4000 Hz | |
Frequency Range | 0.7 to 6000 Hz | |
Resonant Frequency | 18 kHz | |
Electrical Isolation | ≥100000000 Ohm | |
Size - Hex | 0.75 in | 19.1 mm |
Size - Height | 0.98 in | 24.9 mm |
(Q) Extended discharge time constant
English | SI | |
---|---|---|
Frequency Range | 0.1 to 4000 Hz | |
Frequency Range | 0.07 to 6500 Hz | |
Discharge Time Constant | ≥10 sec | |
Settling Time | <120 sec |
(W) Water Resistant Cable
English | SI | |
---|---|---|
Electrical Connection Position | Side |