PCB-HT356A33
Triaxial, ceramic shear ICP® accel., 10 mV/g, titanium hsg, 1/4-28 4-pin conn., to +325 F
- Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
- Measurement Range: ±500 g pk (±4905 m/s² pk)
- Electrical Connector: 1/4-28 4-Pin
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] 250° F to 325° F data valid with HT option only.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Sensitivity (±10 %) | 10 mV/g | 1.02 mV/(m/s²) | |
Measurement Range | ±500 g pk | ±4905 m/s² pk | |
Frequency Range (±5 %) (y or z axis) | 2 to 10000 Hz | 2 to 10000 Hz | |
Frequency Range (±5 %) (x axis) | 2 to 7000 Hz | 2 to 7000 Hz | |
Resonant Frequency | ≥55 kHz | ≥55 kHz | |
Broadband Resolution (1) | 0.004 g rms | 0.04 m/s² rms | [2] |
Non-Linearity | ≤1 % | ≤1 % | [1] |
Transverse Sensitivity | ≤5 % | ≤5 % | |
Environmental | |||
Overload Limit (Shock) | ±10000 g pk | ±98100 m/s² pk | |
Temperature Range (Operating) | -65 to +250 °F | -54 to +121 °C | [3] |
Temperature Response | See Graph %/°F | See Graph %/°F | [2] [3] |
Electrical | |||
Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤200 Ohm | ≤200 Ohm | |
Output Bias Voltage | 7 to 12 VDC | 7 to 12 VDC | |
Discharge Time Constant | 0.3 to 1.0 sec | 0.3 to 1.0 sec | |
Settling Time (within 10% of bias) | <3 sec | <3 sec | |
Spectral Noise (1 Hz) | 1000 µg/√Hz | 9810 (µm/sec2)/√Hz | [2] |
Spectral Noise (10 Hz) | 300 µg/√Hz | 2943 (µm/sec2)/√Hz | [2] |
Spectral Noise (100 Hz) | 100 µg/√Hz | 981 (µm/sec2)/√Hz | [2] |
Spectral Noise (1 kHz) | 50 µg/√Hz | 490 (µm/sec2)/√Hz | [2] |
Physical | |||
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Shear | Shear | |
Housing Material | Titanium | Titanium | |
Sealing | Hermetic | Hermetic | |
Size - Height | 0.4 in | 10.2 mm | |
Size - Length | 0.77 in | 19.6 mm | |
Size - Width | 0.4 in | 10.2 mm | |
Weight | 0.19 oz | 5.3 gm | [2] |
Electrical Connector | 1/4-28 4-Pin | 1/4-28 4-Pin | |
Electrical Connection Position | Side | Side | |
Mounting Thread | 5-40 Female | 5-40 Female | |
Mounting Torque | 4 to 5 in-lb | 45 to 56 N-cm |
* All specifications are at room temperature unless otherwise specified.
![TempChart](/ContentStore/CommonIncludes/WebGraphics/TempCharts/2731_1.gif)
Accessories
Supplied | ||
080A | Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/isolation hardcoat finish | 1 |
080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
081A27 | Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu | 1 |
081A90 | Mounting stud, 10-32 to 5-40 | 1 |
ACS-1T | Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable | 1 |
M081A27 | Metric mtg stud, 5-40 to M3 x 0.50 long | 1 |
Optional Versions
(HT) High temperature, extends normal operation temperatures
English | SI | |
---|---|---|
Temperature Range | -65 to +325 °F | -54 to +163 °C |