PCB-422E65/A
    zoom_out_map

      PCB-422E65/A

      In-line charge converter, 1 mV/pC, +/-5V output, -5% frequency 5 Hz, 10-32 jack conn., Rad Hard

      • Sensitivity: (±2%)1 mV/pC
      • Output Voltage: ±5 V
      • Temperature Range: -65 to +250 °F (-54 to +121 °C)
      • Housing Material: Stainless Steel

      Specification Notes


      [1] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor.
      [2] Slew rate limiting may result at higher frequencies.
      [3] The low frequency response is accurate within ±25% of the specified frequency
      [1] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor.
      [4] See PCB Declaration of Conformance PS024 for details. A low impendance connection from case to earth ground is required to maintain CE compliance.

      English:SI:
      Performance
      Sensitivity (±2 %) (Charge Conversion)1 mV/pC1 mV/pC
      Input Range±5000 pC±5000 pC
      Low Frequency Response (-5 %)5 Hz5 Hz [3]
      High Frequency Response (4 mA)35 kHz35 kHz [1] [2]
      Non-Linearity≤1.0 % FS≤1.0 % FS
      Environmental
      Temperature Range (Operating)-65 to +250 °F-54 to +121 °C
      Radiation Exposure Limit (Integrated Neutron Flux)≤10000000000 N/cm²≤10000000000 N/cm²
      Maximum Shock1000 g pk9810 m/s² pk
      Humidity Range100 %100 %
      Radiation Exposure Limit (Integrated Gamma Flux)≤1 Mrad≤1 Mrad
      Electrical
      Excitation Voltage+18 to 28 VDC+18 to 28 VDC
      Constant Current Excitation2.2 to 20 mA2.2 to 20 mA
      Output Voltage±5 V±5 V
      Output Impedance<20 Ohm<20 Ohm
      Output Bias Voltage9 to 14.5 VDC9 to 14.5 VDC
      Broadband Electrical Noise (1 to 10000 Hz)7.0 µV-103 dB [1]
      Spectral Noise (1 Hz)5.0 µV/√Hz-106 dB [1]
      Spectral Noise (10 Hz)1.0 µV/√Hz-120 dB [1]
      Spectral Noise (100 Hz)0.1 µV/√Hz-140 dB [1]
      Spectral Noise (1 kHz)0.1 µV/√Hz-140 dB [1]
      Spectral Noise (10 kHz)0.05 µV/√Hz-146 dB [1]
      Capacitance (Maximum allowable at input)20000 pF20000 pF
      Discharge Time Constant≥0.1 sec≥0.1 sec
      Resistance (Minimum required at input)10000 Ohm10000 Ohm
      Source Capacitance Loading<0.0005 %/pF<0.0005 %/pF
      Physical
      Housing MaterialStainless SteelStainless Steel
      SealingWeldedWelded
      Electrical Connector (Input)10-32 Coaxial Jack10-32 Coaxial Jack
      Electrical Connector (Output)10-32 Coaxial Jack10-32 Coaxial Jack
      Size - Diameter0.50 in13 mm
      Size - Length3.0 in76 mm
      Weight0.8 oz23 gm

      * All specifications are at room temperature unless otherwise specified.

      PCB-422E65/A

      Specific References

      Download

      422e65_a_specs.pdf

      PCB-422E65/A_specs

      Download (333.87k)

      422e65_a_manual.pdf

      PCB-422E65/A_manual

      Download (333.87k)

      422-5010-95-l_drawings.pdf

      PCB-422E65/A_drawings

      Download (106.46k)