PCB-4115K-04A
PCB L&T Torque Sensor, Rotary Transformer, 500 in-lb Capacity FS, Flanges and Splines per AND10262 & AND20002
Speed sensor sold separately.- Measurement Range: 500 in-lb (55 Nm)
- Sensitivity: (±15%)2.5 mV/V (2.5 mV/V)
- Non-Linearity: <=0.05 % FS
- Mounting: Flange w/ Splined Shaft
- Maximum Speed: 15000 RPM
Specification Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[2] FS - Full Scale.
[4] Recommended 10 VAC RMS.
[5] Mounting per AND10262 and AND20002.
[6] See PCB Declaration of Conformance PS062 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (Full Scale Capacity) | 500 in-lb | 55 Nm | [1] |
| Sensitivity (±15 %) (output at rated capacity) | 2.5 mV/V | 2.5 mV/V | [1] [2] |
| Non-Linearity | ≤0.05 % FS | ≤0.05 % FS | [2] |
| Hysteresis | ≤0.05 % FS | ≤0.05 % FS | [2] |
| Non-Repeatability | ≤0.03 % FS | ≤0.03 % FS | [2] |
| Environmental | |||
| Overload Limit | 1500 in-lb | 170 Nm | |
| Temperature Range (Operating) | -65 to 225 °F | -54 to 107 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to 77 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0036 %Reading/°C | [3] |
| Temperature Effect on Zero Balance (Maximum) | ±0.002 %FS/°F | ±0.0036 %FS/°C | [2] [3] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | [1] |
| Excitation Frequency | 3.28 kHz | 3.28 kHz | |
| Excitation Voltage | 2 to 10 VAC rms | 2 to 10 VAC rms | [4] |
| Bridge Current (at 5 VAC) | 50 mA | 50 mA | |
| Insulation Resistance | >5000000 kohm | >5000000 kohm | |
| Zero Balance | ≤2 % FS | ≤2 % FS | [2] |
| Physical | |||
| Size - Shaft Length | 9.56 in | 242.82 mm | |
| Size - Housing Length | 8.25 in | 209.55 mm | |
| Size - Housing Height | 6.00 in | 152.40 mm | |
| Weight | 47 lb | 21.3 kg | |
| Mounting | Flange w/ Splined Shaft | Flange w/ Splined Shaft | [5] |
| Sensing Element | Strain Gage | Strain Gage | |
| Housing Material | Black Oxided Steel | Black Oxided Steel | |
| Shaft Material | Steel | Steel | |
| Electrical Connector | MS3102A-14S-5P | MS3102A-14S-5P | |
| Torsional Stiffness | 94000 in-lb/radian | 10600 N-m/radian | |
| Rotating Inertia | 0.0051 in-lb sec2 | 0.0006 N-m sec2 | |
| Maximum Speed | 15000 RPM | 15000 RPM | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| 180-019A | Mating conn., 5-socket (F) (for Series 3100, 4100 & 4200) | 1 |
| 8113-105A | Relay activated precision shunt calibration module | 1 |
PCB-4115K-04A
