PCB-376C01
377C01 microphone with short 426A07 preamplifier, TEDS
- Nominal Microphone Diameter: 1/4"
- Frequency Response Characteristic: Free-Field
- Frequency Range: (+2 / -3dB)4 to 100000 Hz
- Dynamic Range: 165 dB re 20 µPa
Specification Notes
[1] Typical.
[2] TEDS Capable Digital Communication, compliant with IEEE 1451.4
[3] re 250 Hz
[4] A-Weighted inherent noise is specified from 20 Hz - 20 kHz.
[1] Typical.
[3] re 250 Hz
[5] Prepolarized
[1] Typical.
[6] Venting through Preamp.
[7] See PCB Declaration of Conformance PS167 and PS076 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Nominal Microphone Diameter | 1/4" | 1/4" | |
Frequency Response Characteristic (at 0° incidence) | Free-Field | Free-Field | |
Sensitivity (±3 dB) | -54 dB re 1 V/Pa | -54 dB re 1 V/Pa | [3] |
Sensitivity | 2.0 mV/Pa | 2.0 mV/Pa | [3] |
Frequency Range (+2 / -3 dB) | 4 to 100000 Hz | 4 to 100000 Hz | |
Frequency Range (±2 dB) | 5 to 80000 Hz | 5 to 80000 Hz | |
Frequency Range (±1 dB) | 7 to 12500 Hz | 7 to 12500 Hz | |
Lower Limiting Frequency (3) | 0.75 to 4.0 Hz | 0.75 to 4.0 Hz | |
Inherent Noise | 42 dB(A) re 20 µPa | 42 dB(A) re 20 µPa | [1] [4] |
Dynamic Range (3% Distortion Limit) | 165 dB re 20 µPa | 165 dB re 20 µPa | [1] |
TEDS Compliant | Yes | Yes | [2] |
Environmental | |||
Temperature Range (Operating) | -40 to +158 °F | -40 to +70 °C | |
Temperature Coefficient of Sensitivity (+14 to +158°F (-10 to +70°C)) | 0.003 dB/°F | 0.006 dB/°C | [1] [3] |
Static Pressure Coefficient | -0.009 dB/kPa | -0.009 dB/kPa | [1] [3] |
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) | ±0.0014 dB/%RH | ±0.0014 dB/%RH | [3] |
Influence of Axial Vibration (0.1g (1 m/s²)) | 60 dB re 20 µPa | 60 dB re 20 µPa | [1] |
Electrical | |||
Polarization Voltage | 0 V | 0 V | [5] |
Excitation Voltage | 20 to 32 VDC | 20 to 32 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Bias Voltage | 10 to 14 VDC | 10 to 14 VDC | |
Maximum Output Voltage | ±8 Vpk | ±8 Vpk | |
Output Impedance | <50 Ohm | <50 Ohm | |
Physical | |||
Housing Material | Stainless Alloy | Stainless Alloy | |
Venting | Rear | Rear | [6] |
Electrical Connector | 10-32 Jack | 10-32 Jack | |
Mounting Thread (Grid) | 0.25 - 60 UNS | 0.25 - 60 UNS | |
Size - Diameter (with grid) | 0.28 in | 7.1 mm | |
Size - Diameter (without grid) | 0.25 | 6.35 | |
Size - Height (with grid) | 1.51 in | 38.3 mm | |
Size - Height (without grid) | 1.46 in | 37.1 mm | |
Weight | 0.19 oz | 5.4 gm | [1] |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
ACS-63 | Calibration for microphone/preamplifier with TEDS programming | 1 |