PCB-356M132
Low Outgassing, Triaxial, high sensitivity, ceramic shear ICP® accel., 500 mV/g, 0.5 to 3k Hz, titanium hsg, 4-pin conn.
This accelerometer features low out-gassing construction that is ideal for use in thermal vacuum chambers for environmental testing.- Sensitivity: (±10%)500 mV/g (51 mV/(m/s²))
- Measurement Range: ±10 g pk (±98 m/s² pk)
- Electrical Connector: 1/4-28 4-Pin
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Sensitivity (±10 %) | 500 mV/g | 51 mV/(m/s²) | |
Measurement Range | ±10 g pk | ±98 m/s² pk | |
Frequency Range (±5 %) | 0.5 to 3000 Hz | 0.5 to 3000 Hz | |
Frequency Range (±10 %) | 0.3 to 4000 Hz | 0.3 to 4000 Hz | |
Resonant Frequency | ≥14 kHz | ≥14 kHz | |
Broadband Resolution (1) | 0.00006 g rms | 0.0006 m/s² rms | [2] |
Phase Response (±5 °) (at 70°F [21°C]) | 2 to 4000 Hz | 2 to 4000 Hz | |
Non-Linearity | ≤1 % | ≤1 % | [1] |
Transverse Sensitivity | ≤5 % | ≤5 % | |
Environmental | |||
Overload Limit (Shock) | ±5000 g pk | ±49000 m/s² pk | |
Temperature Range (Operating) | -65 to +176 °F | -54 to +80 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | |
Base Strain Sensitivity | 0.001 g/µε | 0.01 (m/s²)/µε | [2] |
Electrical | |||
Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤300 Ohm | ≤300 Ohm | |
Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | |
Discharge Time Constant | 0.8 to 2.0 sec | 0.8 to 2.0 sec | |
Settling Time (within 10% of bias) | <10 sec | <10 sec | |
Spectral Noise (1 Hz) | 18 µg/√Hz | 180 (µm/sec2)/√Hz | [2] |
Spectral Noise (10 Hz) | 6 µg/√Hz | 60 (µm/sec2)/√Hz | [2] |
Spectral Noise (100 Hz) | 2 µg/√Hz | 20 (µm/sec2)/√Hz | [2] |
Spectral Noise (1 kHz) | 0.7 µg/√Hz | 7 (µm/sec2)/√Hz | [2] |
Spectral Noise (10 kHz) | 0.2 µg/√Hz | 2 (µm/sec2)/√Hz | [2] |
Physical | |||
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Shear | Shear | |
Housing Material | Titanium | Titanium | |
Sealing | Hermetic | Hermetic | |
Size - Height | 0.55 in | 14.0 mm | |
Size - Length | 0.80 in | 20.3 mm | |
Size - Width | 0.55 in | 14.0 mm | |
Weight | 0.42 oz | 11.8 gm | [2] |
Electrical Connector | 1/4-28 4-Pin | 1/4-28 4-Pin | |
Electrical Connection Position | Side | Side | |
Mounting Thread | 5-40 Female | 5-40 Female | |
Mounting Torque | 4 to 5 in-lb | 45 to 56 N-cm |
* All specifications are at room temperature unless otherwise specified.
![TempChart](/ContentStore/CommonIncludes/WebGraphics/TempCharts/3892_1.gif)
Accessories
Supplied | ||
080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
080A145 | Adhesive mtg base, 0.75" hex x 0.2" thk, 5-40 tapped hole, w/isolating hardcoat finish | 1 |
081A27 | Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu | 1 |
ACS-1T | Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable | 1 |
M081A27 | Metric mtg stud, 5-40 to M3 x 0.50 long | 1 |
Optional Versions
(A) Adhesive Mount
Accessories: | |||
---|---|---|---|
Supplied | 080A109 | Petro Wax | 1 |
Supplied | 080A90 | Quick Bonding Gel | 1 |
Supplied | ACS-1T | NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. | 1 |
(TLA) TEDS LMS International - Free Format
English | SI | |
---|---|---|
Output Bias Voltage | 8.5 to 13 |
(TLB) TEDS LMS International - Automotive Format
English | SI | |
---|---|---|
Output Bias Voltage | 8.5 to 13 |
(TLC) TEDS LMS International - Aeronautical Format
English | SI | |
---|---|---|
Output Bias Voltage | 8.5 to 13 |