PCB-2302-02A
PCB L&T Reaction Torque Transducer, 20k in-lb/1,667 ft-lb (2.3 kN-m) rated capacity, 50% static overload protection, 5-in (127 mm) Steel Flange
- Measurement Range: 20000 lbf-in (2259 Nm)
- Sensitivity: (±15%)2 mV/V (2 mV/V)
- Mounting: Flange (3/8in Bolts) (Flange (M10 Bolts))
- Size - Diameter: 5.00 in (127 mm)
- Size - Length: 3.50 in (88.9 mm)
- Torsional Stiffness: 7500 klbf-in/radian (847.4 kN-m/radian)
Specification Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[1] Nominal.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] See Drawing 26440 for Complete Dimensions
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range (Full Scale Capacity) | 20000 lbf-in | 2259 Nm | [1] |
Sensitivity (±15 %) (output at rated capacity) | 2 mV/V | 2 mV/V | [1] [2] |
Non-Linearity | ≤0.1 % FS | ≤0.1 % FS | [2] |
Hysteresis | ≤0.1 % FS | ≤0.1 % FS | [2] |
Non-Repeatability | ≤0.02 % FS | ≤0.02 % FS | [2] |
Resonant Frequency | 2200 Hz | 2200 Hz | |
Maximum Torque | 30000 lbf-in | 3390 Nm | |
Environmental | |||
Overload Limit (Axial Thrust) | 20000 lbf | 88.96 kN | [3] |
Overload Limit (Overhung Moment) | 10000 lbf-in | 1130 Nm | [3] |
Overload Limit (Shear) | 10000 lbf | 44.48 kN | [3] |
Temperature Range (Operating) | -65 to +200 °F | -54 to +93 °C | |
Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0036 %Reading/°C | [4] |
Temperature Effect on Zero Balance (Maximum) | ±0.002 %FS/°F | ±0.0036 %FS/°C | [2] [4] |
Electrical | |||
Bridge Resistance | 350 Ohm | 350 Ohm | [1] |
Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [5] |
Insulation Resistance | 5 GOhm | 5 GOhm | |
Zero Balance | ≤1 %RO | ≤1 %RO | |
Output Polarity | cw+ | cw+ | |
Physical | |||
Size - Diameter | 5.00 in | 127 mm | [6] |
Size - Length | 3.50 in | 88.9 mm | [6] |
Weight | 10 lb | 4536 g | |
Mounting | Flange (3/8in Bolts) | Flange (M10 Bolts) | |
Torsional Stiffness | 7500 klbf-in/radian | 847.4 kN-m/radian | |
Sensing Element | Strain Gage | Strain Gage | |
Housing Material (Sensor) | Plated Steel | Plated Steel | |
Electrical Connector | PT02E-10-6P | PT02E-10-6P |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
181-012A | Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. | 1 |