PCB-212B
Charge quartz force ring, 10k lb comp., 18 pC/lb, charge output
- Sensitivity: (±15%)18 pC/lb (4047 pC/kN)
- Upper Frequency Limit: 60000 Hz
- Temperature Range: -100 to +400 °F (-73 to +204 °C)
- Weight: 0.67 oz (19 gm)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Estimated using rigid body dynamics calculations.
[3] Low frequency response and system noise dependent on choice of external signal conditioning electronics.
[4] Typical.
English: | SI: | ||
---|---|---|---|
Performance | |||
Sensitivity (±15 %) | 18 pC/lb | 4047 pC/kN | |
Measurement Range (Compression) | 10000 lb | 44.48 kN | |
Maximum Static Force (Compression) | 15000 lb | 66.72 kN | |
Upper Frequency Limit | 60000 Hz | 60000 Hz | [2] [3] |
Non-Linearity | ≤1 % FS | ≤1 % FS | [1] |
Environmental | |||
Temperature Range | -100 to +400 °F | -73 to +204 °C | |
Temperature Coefficient of Sensitivity | ≤0.01 %/°F | ≤0.018 %/°C | |
Electrical | |||
Capacitance | 19 pF | 19 pF | [4] |
Insulation Resistance | ≥1E12 | ≥1E12 | |
Output Polarity (Compression) | Negative | Negative | |
Physical | |||
Preload | 2000 lb | 8.896 kN | |
Stiffness | 16 lb/µin | 2.8 kN/µm | [4] |
Size - Diameter | 0.870 in | 22.1 mm | |
Size - Height | 0.390 in | 9.91 mm | |
Size - Bolt Diameter | 3/8 in | 10 mm | |
Size - ID (Hole Diameter) | 0.413 in | 10.49 mm | |
Size - OD (Sensor) | 0.870 in | 22.1 mm | |
Size - Sensing Surface | 0.665 in | 16.89 mm | |
Weight | 0.67 oz | 19 gm | |
Housing Material | Stainless Steel | Stainless Steel | |
Sealing | Hermetic | Hermetic | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Electrical Connection Position | Side | Side |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
080A82 | Assembly lubricant (for Series 201-207 force rings) | 0 |
081A12 | Mounting stud, 5/16-24 x 0.910", BeCu for Models 202B & 212B | 0 |
082B02 | Anti-friction washer for Models (M)202B, (M)212B, (M)260A01, (M)260A11 & (M)260A31 | 0 |
083B02 | Pilot bushing for Models 202B & 212B | 0 |
Optional Versions
(M) Metric Mount
Accessories: | |||
---|---|---|---|
Supplied | 080A82 | Accessory for Force - Torque Division Product | 0 |
Supplied | 080A82 | Accessory for Force - Torque Division Product | 0 |
Supplied | M081A12 | Mounting Stud, M8 x 1.00, BeCu | 0 |
Supplied | M081A12 | Mounting Stud, M8 x 1.00, BeCu | 0 |
Supplied | M083B02 | Pilot Bushing | 0 |
Supplied | M083B02 | Pilot Bushing | 0 |
Supplied | 082B02 | Anti-Friction Washer | 0 |
Supplied | 082B02 | Anti-Friction Washer | 0 |
(P) Positive Output Polarity
English | SI | |
---|---|---|
Output Polarity | Positive |
(W) Water Resistant Cable
English | SI | |
---|---|---|
Electrical Connector | Molded Integral Cable | Molded Integral Cable |
Electrical Connection Position | Side |