PCB-209C02

Miniature ICP® force sensor, 10 sec DTC, 2.2 lb comp., 2200 mV/lb

Measurement Range: 2.2 lb (0.00979 kN)
Sensitivity: (±15%)2200 mV/lb (494604 mV/kN)
Low Frequency Response: (-5%)0.05 Hz
Upper Frequency Limit: 100000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)
Mounting Thread: 10-32 Female (No Metric Equivalent)

Specification Notes

[1] Typical.
[2] Calculated from discharge time constant.
[3] Estimated using rigid body dynamics calculations.
[1] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	2200 mV/lb	494604 mV/kN
Measurement Range (Compression)	2.2 lb	0.00979 kN
Maximum Static Force (Compression)	11 lb	0.0489 kN
Broadband Resolution (1)	0.00002 lb-rms	0.00009 N-rms	[1]
Low Frequency Response (-5 %)	0.05 Hz	0.05 Hz	[2]
Upper Frequency Limit	100000 Hz	100000 Hz	[3]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.05 %/°F	≤0.09 %/°C
Electrical
Discharge Time Constant (at room temp)	≥10 sec	≥10 sec
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Spectral Noise (1 Hz)	0.0000123 lb/√Hz	0.0000548 N/√Hz	[1]
Spectral Noise (10 Hz)	0.00000094 lb/√Hz	0.0000042 N√Hz	[1]
Spectral Noise (100 Hz)	0.000000389 lb/√Hz	0.00000174 N/√Hz	[1]
Spectral Noise (1000 Hz)	0.000000065 lb/√Hz	0.000000292 N/√Hz	[1]
Output Polarity (Compression)	Positive	Positive
Physical
Stiffness	2 lb/µin	0.35 kN/µm	[1]
Size - Hex	0.375 in	9.53 mm
Size - Height	0.610 in	15.49 mm
Weight	0.28 oz	8 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting Thread	10-32 Female	No Metric Equivalent