PCB-208A13
Multi-purpose ICP® force sensor, 500 lb comp. 500 lb tension, 10 mV/lb, axial conn.
- Measurement Range: 500 lb (2.224 kN)
- Sensitivity: (±15%)10 mV/lb (2248 mV/kN)
- Low Frequency Response: (-5%)0.0003 Hz
- Upper Frequency Limit: 36000 Hz
- Temperature Range: -65 to +250 °F (-54 to +121 °C)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Sensitivity (±15 %) | 10 mV/lb | 2248 mV/kN | |
Measurement Range (Compression) | 500 lb | 2.224 kN | |
Measurement Range (Tension) | 500 lb | 2.224 kN | |
Maximum Static Force (Compression) | 3000 lb | 13.5 kN | |
Maximum Static Force (Tension) | 750 lb | 3.336 kN | |
Broadband Resolution (1) | 0.005 lb-rms | 0.02224 N-rms | [2] |
Low Frequency Response (-5 %) | 0.0003 Hz | 0.0003 Hz | [3] |
Upper Frequency Limit | 36000 Hz | 36000 Hz | [4] |
Non-Linearity | ≤1 % FS | ≤1 % FS | [1] |
Environmental | |||
Temperature Range | -65 to +250 °F | -54 to +121 °C | |
Temperature Coefficient of Sensitivity | ≤0.05 %/°F | ≤0.09 %/°C | |
Electrical | |||
Discharge Time Constant (at room temp) | ≥2000 sec | ≥2000 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤100 Ohm | ≤100 Ohm | |
Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
Output Polarity (Compression) | Positive | Positive | |
Physical | |||
Stiffness | 6 lb/µin | 1.05 kN/µm | [2] |
Size - Hex | 0.625 in | 15.88 mm | |
Size - Height | 1.17 in | 29.7 mm | |
Weight | 0.80 oz | 22.7 gm | |
Housing Material | Stainless Steel | Stainless Steel | |
Sealing | Epoxy | Epoxy | |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
Electrical Connection Position | Axial | Axial |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
080A81 | Thread lock adhesive (for Series 200) | 1 |
081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 1 |
084A03 | Impact cap, convex (for Series 208) | 1 |
M081A62 | Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu | 1 |
Optional Versions
(W) Water Resistant Cable
English | SI | |
---|---|---|
Electrical Connector | Sealed Cable |