PCB-1381-04A
Rod End Load Cell, 20k lbf (89 kN) rated capacity, 50% static overload protection, 1-14 male & female thread, steel construction
- Measurement Range: 20 klbf (89 kN)
- Size - Diameter: 1.50 in (38.1 mm)
- Size - Height: 4.50 in (114.3 mm)
- Electrical Connector: PT02E-10-6P
Specification Notes
[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 45728 for complete dimensions.
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range | 20 klbf | 89 kN | [1] |
Sensitivity (±10 %) | 2 mV/V | 2 mV/V | [2] |
Non-Linearity | ≤0.25 % FS | ≤0.25 % FS | |
Hysteresis | ≤0.15 % FS | ≤0.15 % FS | |
Non-Repeatability | ≤0.05 %RO | ≤0.05 %RO | |
Resonant Frequency | 15 kHz | 15 kHz | |
Environmental | |||
Overload Limit | 30 klbf | 133 kN | |
Load Limit (Side Force, FX or FY) | 2400 lbf | 10.7 kN | [3] |
Load Limit (Bending Moment, MX or MY) | 6500 inf-lb | 734 Nm | [3] |
Load Limit (Axial Torque, MZ) | 7500 inf-lb | 847 Nm | [3] |
Temperature Range (Operating) | -20 to +200 °F | -28 to +93 °C | |
Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
Temperature Effect on Output (Maximum) | ±0.01 %Reading/°F | ±0.018 %Reading/°C | [4] |
Temperature Effect on Zero Balance (Maximum) | ±0.005 %FS/°F | ±0.009 %FS/°C | [4] |
Electrical | |||
Bridge Resistance | 350 Ohm | 350 Ohm | [5] |
Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [6] |
Insulation Resistance | >5000000000 Ohm | >5000000000 Ohm | |
Zero Balance | ≤1 % FS | ≤1 % FS | |
Output Polarity | Positive | Positive | |
Output Polarity | +Tension | +Tension | |
Physical | |||
Size - Height | 4.50 in | 114.3 mm | [7] |
Size - Diameter | 1.50 in | 38.1 mm | [7] |
Weight | 1.2 lb | 544 g | |
Mounting Thread | 1 - 14 Male | No Metric Equivalent | |
Mounting Thread | 1 - 14 Female | No Metric Equivalent | |
Cover Material | Anodized Aluminum | Anodized Aluminum | |
Sensing Element | Strain Gage | Strain Gage | |
Deflection at Full Scale Capacity | 0.0012 in | 0.030 mm | |
Electrical Connector | PT02E-10-6P | PT02E-10-6P |
* All specifications are at room temperature unless otherwise specified.
Accessories
Optional | ||
181-012A | Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. | 1 |
8311-01-10A | Cable assembly for sensors with PT conn., 10-ft, PT conn. to pigtails, 4-cond. cable | 1 |