PCB-054204-01093

Fastener Load Washer, Metric, M4, 9 kN (2 klbf), 5-ft, Integral Cable w/ pigtails

For more information on RS Technologies Fastener Testing products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology/fastener-testing

To view the RS Technologies Fastener Testing Product Catalog, please visit:
https://www.pcb.com/Contentstore/MktgContent/LinkedDocuments/Force-Torque/RS_Fast_Testing_Lowres.pdf

Measurement Range: 2023 lb (9 kN)
Sensitivity: 1.50 mV/V
Size - Diameter: .625 in (15.88 mm)
Size - Height: .255 in (6.48 mm)

Specification Notes

[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] See Outline Drawing (LT30776) for Complete Dimensions

	English:	SI:
Performance
Measurement Range (Full Scale Capacity)	2023 lb	9 kN	[1]
Sensitivity (output at rated capacity)	1.50 mV/V	1.50 mV/V	[1] [2]
Non-Linearity	±5 % FS	±5 % FS	[2]
Hysteresis	±5 % FS	±5 % FS	[2]
Non-Repeatability	±2 % FS	±2 % FS	[2]
Resonant Frequency	10 kHz	10 kHz
Environmental
Overload Limit	3035 lb	13.5 kN
Temperature Range (Operating)	0 to +200 °F	-18 to +93 °C
Temperature Range (Compensated)	N/A	N/A
Temperature Effect on Output (Maximum)	±0.02 %Reading/°F	±0.036 %Reading/°C	[3]
Temperature Effect on Zero Balance (Maximum)	±0.02 %FS/°F	±0.036 %FS/°C	[2]
Electrical
Bridge Resistance	350 Ohm	350 Ohm	[1]
Excitation Voltage (Recommended)	10 VDC	10 VDC	[4]
Physical
Size - Height	.255 in	6.48 mm	[5]
Size - Diameter	.625 in	15.88 mm
Fastener Size	NO EQUIV	4.00 mm
Through Hole Diameter	.162 in	4.11 mm
Sensing Element	Strain Gage	Strain Gage
Electrical Connector	Pigtail Ends	Pigtail Ends
Electrical Connection Position	Side	Side