PCB-054116-01803
Fastener Load Washer, English, 1-in, 80 klbf (355.6 kN), 5-ft Integral Cable w/pigtails
For more information on RS Technologies Fastener Testing products and applications, please visit:https://www.pcb.com/sensors-for-test-measurement/fastener-technology/fastener-testing
To view the RS Technologies Fastener Testing Product Catalog, please visit:
https://www.pcb.com/Contentstore/MktgContent/LinkedDocuments/Force-Torque/RS_Fast_Testing_Lowres.pdf
- Measurement Range: 80000 lb (355.60 kN)
- Sensitivity: 1.50 mV/V
- Size - Diameter: 2.160 in (54.86 mm)
- Size - Height: 0.735 in (18.67 mm)
Specification Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] See Outline Drawing (LT30776) for Complete Dimensions
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (Full Scale Capacity) | 80000 lb | 355.60 kN | [1] |
| Sensitivity (output at rated capacity) | 1.50 mV/V | 1.50 mV/V | [1] [2] |
| Non-Linearity | ±5 % FS | ±5 % FS | [2] |
| Hysteresis | ±5 % FS | ±5 % FS | [2] |
| Non-Repeatability | ±2 % FS | ±2 % FS | [2] |
| Resonant Frequency | 10 kHz | 10 kHz | |
| Environmental | |||
| Overload Limit | 120000 lb | 533.40 kN | |
| Temperature Range (Operating) | 0 to +200 °F | -18 to +93 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0018 %Reading/°C | [3] |
| Temperature Effect on Zero Balance (Maximum) | ±0.002 %FS/°F | ±0.0018 %FS/°C | [2] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | [1] |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [4] |
| Zero Balance | ≤1 % FS | ≤1 % FS | |
| Output Polarity (Compression) | Positive | Positive | |
| Isolation Resistance | ≥1G Ohm | ≥1G Ohm | |
| Physical | |||
| Size - Height | 0.735 in | 18.67 mm | [5] |
| Size - Diameter | 2.160 in | 54.86 mm | |
| Fastener Size | 1.0 in | NO EQUIV | |
| Through Hole Diameter | 1.006 in | 25.55 mm | |
| Sensing Element | Strain Gage | Strain Gage | |
| Electrical Connector | Pigtail Ends | Pigtail Ends | |
| Electrical Connection Position | Side | Side | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Optional | ||
| 080922-01000 | Model 922 Portable Digital Peak Meter for measuring torque, torque and angle, or load measurement. Click-wrench calc feature and multi-limit sets. Complete with battery charger, data transfer software, and instruction manual | 0 |
| 080962-01000 | Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case | 0 |
| Supplied | ||
| 7122R-007502 | 1 | |
| 92160-032552 | 1 | |
| 92160-032553 | 1 | |
PCB-054116-01803
