PCB-039237-50022/B
Rotary Torque Angle Transducer, w/Auto-ID, 200 lbf-in (22.6 Nm), 3/8-inch Square Drive, 10-pin PT Receptacle
For more information on RS Technologies Fastener products and applications, please visit:https://www.pcb.com/sensors-for-test-measurement/fastener-technology
and click the link for Fastener Testing or Fastener Assembly
- Measurement Range: 200 lbf-in (22.6 Nm)
- Sensitivity: 2.0 mV/V (2.0 mV/V)
- Non-Linearity: <=0.25 % FS
- Maximum Speed: 2500 RPM
Specification Notes
[1] FS - Full Scale.
[2] Matched for mV/V and shunt calibration.
[3] Matched to ±0.25% F.S.
[4] Over compensated temperature range.
[1] FS - Full Scale.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] A-B Track 90° Phase Difference, Flat Over Operating Speed
[7] Magnetic Encoder Specifications.
[8] Matched with 43.575 kOhm Precision Resistor.
[9] Per ANSI B107.4 Specifications
[10] See Outline Drawing LT38037 for Complete Dimensions
[11] See PCB Declaration of Conformance PS119 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (Full Scale Capacity) | 200 lbf-in | 22.6 Nm | |
| Sensitivity (output at rated capacity) | 2.0 mV/V | 2.0 mV/V | [3] |
| Non-Linearity | ≤0.25 % FS | ≤0.25 % FS | [1] |
| Hysteresis | ≤0.25 % FS | ≤0.25 % FS | [1] |
| Non-Repeatability | ≤0.05 % FS | ≤0.05 % FS | [1] |
| Interchangeabilty | ≤0.30 % FS | ≤0.30 % FS | [1] [2] |
| Environmental | |||
| Overload Limit | 300 lbf-in | 33.9 Nm | |
| Temperature Range (Operating) | 0 to +200 °F | -18 to +93 °C | |
| Temperature Range (Compensated) | +70 to +150 °F | +21 to +66 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0018 %Reading/°C | [4] |
| Temperature Effect on Zero Balance (Maximum) | ±0.002 %FS/°F | ±0.0018 %FS/°C | [4] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | |
| Excitation Voltage | 10 VDC | 10 VDC | [5] |
| Insulation Resistance | ≥5 GOhm | ≥5 GOhm | |
| Zero Balance | ≤2 % FS | ≤2 % FS | [1] |
| Counts Per Revolution | 1472 | 1472 | [7] |
| Resolution w/ Quadrature | 1/4 ° | 1/4 ° | [7] |
| Output Voltage | High 5V to Low 0.5V | High 5V to Low 0.5V | [7] |
| Power Required (maximum) | 5 VDC @ 120mA | 5 VDC @ 120mA | [7] |
| Magnetic Encoder (Poles) | 360 | 360 | [7] |
| Magnetic Encoder (Ouput) | See Note | See Note | [6] [7] |
| Shunt Calibration | ≤0.25 % FS | ≤0.25 % FS | [1] [8] |
| Auto ID | TTL Proprietary | TTL Proprietary | |
| Physical | |||
| Size - Shaft Length | 3.23 in | 82.0 mm | [10] |
| Size - Housing Length | 2.30 in | 58.4 mm | [10] |
| Size - Housing Height | 2.00 in | 50.8 mm | [10] |
| Weight | .85 lb | 386 gm | |
| Mounting | 3/8 inch Sq Drive | 9.52 mm Sq Drive | [9] |
| Sensing Element | Strain Gage | Strain Gage | |
| Housing Material | Aluminum | Aluminum | |
| Shaft Material | Steel | Steel | |
| Electrical Connector | PT02H-12-10P | PT02H-12-10P | |
| Maximum Speed | 2500 RPM | 2500 RPM | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Optional | ||
| 080920-01000 | Model 920 Portable Digital Peak Meter for torque, torque-angle or load measurement; Click-Wrench calc feature, w/battery charger, instruction manual & shoulder strap | 1 |
| 080962-01000 | Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case | 1 |
| 097000-34445 | Cable, Coiled, 3-ft, RS Instrument to 10-pin Transducers | 1 |
| 4242R-000630 | 1 | |
| Supplied | ||
| 7122R-04352A | Precision Cal Resistor 43.575K Ohm | 1 |
PCB-039237-50022/B
